Monday, August 12, 2013

Block USB port Using 3 Different Ways:


Many times you might observe that your pen drive is not detecting in cyber cafe or in your college lab or etc places.Have you ever think how it happens??!!!!after reading this post you may got surprised because its very simple trick.
So here is the to block USB ports of your PC.
I have described three Different methods.
You can choose whatever you want.

1:DISABLING THROUGH REGISTRY EDITOR

Three simple steps for this trick.
Step 1)
Open Run window and type regedit and press enter.
Step 2)
nevigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlset\Services\UsbStor
Step 3)
Double click on Start (right side)
change value to 4 and select hexadecimal(if not selected).
Done!!
to enable it:change value to 3.

2:DISABLING THROUGH DEVICE MANAGER

Steps are:
Step 1)
Open Run window
Step 2)
type “devmgmt.msc”
Step 3)
Go To Universal serial bus controller
Step 4)
Select and right click on it and you can find disable option

3:DISABLE THROUGH BIOS

Steps are:
Step 1)
At system startup press DEL or F2 key to open BIOS settings
Step 2)
In BIOS find advance settings or Onboard devices menu(change with BIOS manufacturer).
Step 3)
Find USB configurations and Disable USB controllers to disable all USB ports.
Change it to Enable if you want to enable.

Photo: Block USB port Using 3 Different Ways:

Many times you might observe that your pen drive is not detecting in cyber cafe or in your college lab or etc places.Have you ever think how it happens??!!!!after reading this post you may got surprised because its very simple trick.
So here is the to block USB ports of your PC.
I have described three Different methods.
You can choose whatever you want.

1:DISABLING THROUGH REGISTRY EDITOR

Three simple steps for this trick.
Step 1)
Open Run window and type regedit  and press enter.
Step 2)
nevigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlset\Services\UsbStor
Step 3)
Double click on Start (right side)
change value to 4 and select hexadecimal(if not selected).
Done!!
to enable it:change value to 3.

2:DISABLING THROUGH DEVICE MANAGER

Steps are:
Step 1)
Open Run window
Step 2)
type “devmgmt.msc” 
Step 3)
Go To Universal serial bus controller 
Step 4)
Select and right click on it and you can find disable option

3:DISABLE THROUGH BIOS
 
Steps are:
Step 1)
At system startup press DEL or F2 key to open BIOS settings
Step 2)
In BIOS find advance settings or Onboard devices menu(change with BIOS manufacturer).
Step 3)
Find USB configurations and Disable USB controllers to disable all USB ports.
Change it to Enable if you want to enable.

No comments:

Post a Comment